Bai BA-220 Spezifikationen PDF herunterladen (Seite 22)

Applying Decals to Vehicles

Recommended application procedure:

Clean the Window.

● Clean the window glass using SoftScrub® or other mild abrasive cleaner. Do not use

glass cleaner. Mild abrasive cleaners will not scratch the window, but are very

effective at removing wax or other chemical coatings that will interfere with the decal

bonding to the glass. Most glass cleaners contain silicone or other chemicals that “fill

in” pits and scratches in the glass. This also leaves a coating on the glass that

prevents the decal from bonding to the window, making it easier to remove.

● Place a small amount of SoftScrub® or other mild abrasive on a green plastic scrubber

pad and gently scrub the area where the decal will be applied for 10 – 20 seconds.

● Rinse and dry the window glass.

Apply the decal.

Note: This procedure uses a squeegee from BAI to help apply decals. A thin straight edge

such as a credit card can be used instead of the squeegee.

Using these directions should result in a strong bond with the window glass. The decal should

not appear “stretched” or have bubbles from trapped air.

Warning: The backing paper supports the decal and helps it keep the rectangular shape. The

decal material itself is relatively soft and may stretch or sag if the backing is completely

peeled off before the decal is applied. For best results, follow these steps:

1. Peel top of decal back about 1” 2. Bend backing paper flat against back

of decal

Ver. 1.8 Barcode Automation, inc 800-528-9167 FAX: 407-327-6172 22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28

Keine Kommentare

Bai BA-220 Spezifikationen Seite 22